Перейти к основному содержанию

Изменения для iPad Air 2 LTE Display Assembly Replacement Введения

Редактировать с помощью Scott Havard -

Правка одобрена автор Scott Havard

До
После
Без изменений
Устройство
iPad Air 2 LTE
Type
replacement
Thing
Display Assembly
Title
iPad Air 2 LTE Display Assembly Replacement
Introduction
Follow this guide to replace a broken front panel assembly on an iPad Air 2 LTE. The front panel or display assembly consists of the glass digitizer on top and the fused LCD underneath. In the iPad Air 2, these two parts are not separable and must be replaced as one piece.
Note that the fingerprint scanner in the home button is paired to the iPad's logic board. In order to maintain Touch ID functionality, you must transfer your original home button to the new display assembly.
This process can fix issues like a cracked glass digitizer, a non-responsive touchscreen, or a broken LCD screen.
Time Required Min
Нет оценки
Time Required Max
Нет оценки
Imageid
До
После
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
Нет
Summary
Fix a cracked or faulty screen by replacing the display assembly in an iPad Air 2 LTE.

Руководство по Предпосылкам

Инструменты

  • iOpener x1 added.
  • Suction Handle x1 added.
  • Spudger x1 added.
  • iFixit Opening Tool x1 added.
  • Phillips #000 Screwdriver x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Battery Blocker x1 added.
  • Phillips #00 Screwdriver x1 added.

Запчасти

  • iPad Air 2 Screen x1 added.
  • iPad Air 2 LTE Adhesive Strips x1 added.

Флаги

  • Featured Guide added.