Возврат к шагу #4
Отредактированно Jeff Suovanen -
Правка одобрена автор Jeff Suovanen
- До
- После
- Без изменений
Шаг Линий
| [* icon_note] Heating the area around the home/Touch ID sensor will help soften the adhesive holding its delicate cable in place, making it easier to remove safely. | |
| [* black] Flip the display assembly over. Use a hairdryer or [guide|25705|prepare an iOpener|new_window=true] and apply it to the lower edge of the display for about 90 seconds in order to soften up the adhesive underneath. | |
| + | [* icon_caution] Don't overheat the display. It should be slightly too hot to touch comfortably. |