Перейти к основному содержанию

Возврат к шагу #2

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

-[* icon_note] The next 2 steps demonstrate the iSclack, a handy tool that we recommend for anyone doing frequent repairs. ***If you aren't using the iSclack, skip the next 2 steps and start from step 5 for an alternative method.***
-[* black] Place the bottom of the iPhone X in between the suction cups.
- [* black] Position the suction cups close to the bottom edge of the display without touching the curved part of the glass.
-[* black] Press both suction cups firmly onto the front and back of the iPhone.
+[* icon_note] The next two steps demonstrate the iSclack, a handy tool that we recommend for anyone doing frequent repairs. ***If you aren't using the iSclack, skip down two steps for an alternate method.***
+[* black] If the plastic depth gauge is attached at the center of the iSclack, remove it now—it's not needed for larger phones like the iPhone X.
+[* black] Position the suction cups near the bottom edge of the iPhone—one on the front, and one on the back.
+[* black] Press both suction cups firmly into place.