Перейти к основному содержанию

Возврат к шагу #2

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* icon_note] The next two steps demonstrate the iSclack, a handy tool that we recommend for anyone doing frequent repairs. ***If you aren't using the iSclack, skip down two steps for an alternate method.***
[* black] If the plastic depth gauge is attached at the center of the iSclack, remove it now—it's not needed for larger phones like the iPhone X.
[* black] Position the suction cups near the bottom edge of the iPhone—one on the front, and one on the back.
[* black] Press both suction cups firmly into place.
+ [* icon_note] If your display or back glass is badly cracked, adding a layer of clear packing tape may allow the suction cups to adhere. The iSclack also includes two pieces of tape for this purpose.