Перейти к основному содержанию

Возврат к шагу #5

Редактировать с помощью Adam O'Camb -

Правка одобрена автор Adam O'Camb

До
После
Без изменений

Шаг Линий

-[* black] Insert wisdom here.
+[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.
+[* black] Insert an opening pick into the gap.
+[* icon_note] The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.