Перейти к основному содержанию

Возврат к шагу #8

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

-[* black] Slide the opening pick underneath the display along the top edge of the iPhone to loosen the last of the adhesive.
- [* icon_caution] Don't insert the pick past the display bezel here either. There is potential to damage the front panel sensor array if you do.
- [* icon_note] The top edge of the screen may be difficult to separate. If necessary, slice the adhesive repeatedly and gently wiggle the display until it starts to come free.
+[* icon_note] The top edge of the display is secured with both glue and clips.
+[* black] Slide the opening pick around the top corner of the display, while gently pulling or wiggling the display ***''down''*** in the direction of the Lightning port.
+ [* icon_caution] The clips will break if you use too much force. Work carefully and be patient.
+ [* icon_caution] Again, don't insert the pick more than a few millimeters—about the width of the display bezel—or you may damage the front panel sensor array.
+[* black] Slide the pick to the opposite corner and cut any remaining adhesive securing the display.