Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

-[* black] Use a plastic opening tool to flip up the retainer securing the control board cable connector to its socket on the logic board.
+[* black] Use a plastic opening tool to flip up the retainer securing the upper component board cable connector to its socket on the logic board.
[* black] Pull the connector away from its socket on the logic board.
[* icon_caution] Do not lift the cable upward as you disconnect it.