Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #5

Редактировать с помощью Miroslav Djuric -

На одобрении

До
После
Без изменений

Шаг Линий

[* red] Remove the four 3.4 mm Phillips screws from the DVI connector side of the PowerBook.
[* icon_reminder] When replacing these screws, you must reinstall each screw in the correct order. Begin by installing the screw closest to the display hinge, and go out from there.
[* icon_note] During reassembly, do not reinstallmake sure to reinstall the two screws on the right into their appropriate locations, and not the DVI port anchor holes.
[* icon_note] During reassembly, do not reinstallmake sure to reinstall the two screws on the right into their appropriate locations, and not the DVI port anchor holes.