Перейти к основному содержанию

Changes to Step #3

Edit by Adam O'Camb

Правка одобрена автор Adam O'Camb

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Use thea plastic opening tool to liftpry up and remove the daughterboardcharging assembly.
[* icon_note] The daughterboard may feel stickyassembly is glued down, so pry slowly and make a cracking noise.
[* black] Use your hands
carefully. Applying heat to back of the phone where the assembly is adhered can help soften the adhesive.
[* icon_caution] Do not
completely remove the daughterboardcharging assembly yet. It is still attached to the vibrator motor.
[* black] Use thea plastic opening tool to liftpry up and remove the daughterboardcharging assembly.
[* icon_note] The daughterboard may feel stickyassembly is glued down, so pry slowly and make a cracking noise.
[* black] Use your hands
carefully. Applying heat to back of the phone where the assembly is adhered can help soften the adhesive.
[* icon_caution] Do not
completely remove the daughterboardcharging assembly yet. It is still attached to the vibrator motor.