Перейти к основному содержанию

Changes to Step #3

Edit by Adam O'Camb

Правка одобрена автор Adam O'Camb

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Use a plastic opening toolthe point of a spudger to pry uplift the charging assembly.
[* icon_note] The assembly is glued down, so pry slowly and carefully. Applying heat to back
top of the phone where thecharging assembly is adhered can help softenaway from the adhesivephone.
[* black] Use a plastic opening toolthe point of a spudger to pry uplift the charging assembly.
[* icon_note] The assembly is glued down, so pry slowly and carefully. Applying heat to back
top of the phone where thecharging assembly is adhered can help softenaway from the adhesivephone.
[* icon_caution] Do not completely remove the charging assembly yet. It is still attached to the vibrator motor.