Перейти к основному содержанию

Возврат к шагу #5

Редактировать с помощью Walter Galan -

Правка одобрена автор Walter Galan

До
После
Без изменений

Шаг Линий

+[* icon_note] In the following steps, you will be placing the remaining pieces of adhesive on the front panel.
+[* icon_reminder] ***Do not peel the brown backing off the strips just yet***.
[* black] Place the largest L-shaped adhesive strip on the top left corner of the front panel.
[* black] Smooth the strip down from the center out, taking care to not trap any air bubbles between the strip and the front panel.
-[* icon_note] Do not remove the backing until you have placed every strip on the front panel.