Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Theo Mat -

Правка одобрена автор Theo Mat

До
После
Без изменений

Шаг Линий

[* icon_caution] Warning: do not insert the spudger or plastic card too deep underneath the battery. The display cable runs underneath the battery.
- [* icon_note] Take a look at the next step to see where the cable is.
+ [* icon_note] Scroll down to the next step to see where the cable is.
[* black] Insert the flat end of a spudger as deep as the notch and carefully slide along the edge to cut the adhesive…
[* black] Use a plastic card to cut the remaining adhesive on the left side underneath the battery.