Перейти к основному содержанию

Возврат к шагу #5

Редактировать с помощью Wraithvenge -

Правка одобрена автор Wraithvenge

До
После
Без изменений

Шаг Линий

-[* black] Now that we got the slide off the receiver, we'll be getting to the receiver later.
+[* black] Now that we got the slide off the receiver, we'll work on the slide first and be getting to the receiver later.
[* black] Pull the recoil spring out towards the rear.
-[* black] Make sure barrel link is flat against the barrel and remove it out the front of the slide.
+[* red] Make sure barrel link is flat against the barrel and remove it out the front of the slide.
[* icon_note] At this point we have taken down the weapon to whats called "Field Stripped". If you just needed to do a quick clean, replace the barrel, or recoil spring/guide rod this is all you need. For deep cleaning after shooting we'll keep going.