Перейти к основному содержанию

Возврат к шагу #12

Редактировать с помощью Wraithvenge -

Правка одобрена автор Wraithvenge

До
После
Без изменений

Шаг Линий

-[* black] Insert wisdom here.
+[* black] Push up on the trigger pin to remove it. These are ment to be loose fitting for easy teardown.
+[* black] Once pin is out, the hammer will just slide out.
+[* icon_note] This step only on series 80 styles. Underneath the hammer is the safety lever that pushes up on the firing pin block in the slide when the trigger is pulled.
+[* black] Remove safety lever, it will just fall out (tweezers are just for show).