Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #6

Редактировать с помощью Adam O'Camb -

Правка одобрена автор Adam O'Camb

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Press the new foot down firmly with your finger and hold tightlymaintain pressure for 30 seconds. This willseconds to set the pressure sensitive adhesive.
[* black] Repeat the last seven steps for each of the four feet.
[* icon_reminder] Reassemble the lower case using the new set of screws. These have thread locker pre-applied and should stay put longer than the original screws.
[* black] Press the new foot down firmly with your finger and hold tightlymaintain pressure for 30 seconds. This willseconds to set the pressure sensitive adhesive.
[* black] Repeat the last seven steps for each of the four feet.
[* icon_reminder] Reassemble the lower case using the new set of screws. These have thread locker pre-applied and should stay put longer than the original screws.