Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Andrew Bookholt -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Disconnect both of the following connectors from the logic board:
- [* red] Sleep sensor cable.
- [* orange] Power button cable.
+ [* black] Sleep sensor cable.
+ [* black] Power button cable.
[* icon_caution] Be sure to pull only parallel to the face of the logic board, as pulling up on the socket will break it off the logic board.
[* icon_note] When pulling these connectors away from their sockets, it is helpful to use your fingernails to pull on the ears at each side of the connector.

Изображение 1

Старая версия

Новая версия