Возврат к шагу #1
Отредактированно Christopher Tran -
Правка одобрена автор Christopher Tran
- До
- После
- Без изменений
Шаг Линий
| [* black] Turn the system-board assembly over and place it on a flat and clean surface. | |
| - | [* blue] In sequential order (indicated on the heat sink), loosen the captive screws that secure the heat-sink assembly to the system board. |
| + | [* blue] In sequential order (indicated on the heat sink), loosen the (3) captive 5.5mm screws that secure the heat-sink assembly to the system board. |
| [* red] Disconnect the fan cable from the system board. | |
| [* black] Lift the heat-sink assembly off the system board. |