Перейти к основному содержанию

Изменения к шагу №6

Отредактированно Patrick -

Правка одобрена автор Patrick

Без изменений

Шаг Линий

[* red] Remove the static tape covering the two connectors.
[* orange] Use a spudger to disconnect the battery cables from the motherboard.
[* black] If battery has adhesive, use heat gun for one to two minutes to loosen it. Be careful of the points outlined in red when prying it up. Use guitar picks or a spudger to gently lift the battery and separate the adhesive.
[* black] Use heat gun to remove wireless antenna. The gray portion under antenna is adhesive. Slowly peel back antennae from battery. Place connector on phone before adhering to new battery to make sure cable is not over/under stretched.