Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #2

Редактировать с помощью Adam O'Camb -

Правка одобрена автор Adam O'Camb

До
После
Без изменений

Шаг Линий

[* black] Insert wisdom hereWhen the back panel is warm to the touch, apply a suction cup as close to the heated edge of the phone as you can while avoiding the curved edge.
[* icon_note] The suction cup will not make a good seal on the curved portion of the glass.
[* black] Lift on the suction cup and insert an opening pick under the rear glass.
[* icon_note] Due to the curved glass, you will be pushing up, rather than inserting parallel to the plane of the phone
.
[* black] Insert wisdom hereWhen the back panel is warm to the touch, apply a suction cup as close to the heated edge of the phone as you can while avoiding the curved edge.
[* icon_note] The suction cup will not make a good seal on the curved portion of the glass.
[* black] Lift on the suction cup and insert an opening pick under the rear glass.
[* icon_note] Due to the curved glass, you will be pushing up, rather than inserting parallel to the plane of the phone
.