Изменения к шагу №1

Отредактированно Thomas Humphrey -

Правка одобрена автор Thomas Humphrey

Удален
Добавлено
Без изменений

Шаг Линий

[* red] Remove the six 10 mm screws on the back of the device with a Phillips #0 Screwdriver.
[* black] Flip the back panel over to view the PCB and the PCB covering.
[* orange] Remove the black, yellow, blue, and red wires. They are all attachedwires connected to a connector and can be removed from the PCB with light force.
[* orange] Remove the black, yellow, blue, and red wires. They are all attachedwires connected to a connector and can be removed from the PCB with light force.