Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Walter Galan -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Disconnect the DC-inDC-In cable by simultaneously depressing both locking arms and pulling its connector away from the socket on the logic board toward the top of your iMac.
[* black] Disconnect the DC-inDC-In cable by simultaneously depressing both locking arms and pulling its connector away from the socket on the logic board toward the top of your iMac.
[* icon_note] After both locking arms pass their retaining tabs, it is helpful to push the arms toward the top edge of your iMac while wiggling the connector.

Изображение 1

Старая версия

Новая версия

Изображение 2

Старая версия

Новая версия