Перейти к основному содержанию

Возврат к шагу #8

Редактировать с помощью Andrew Bookholt -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Insert wisdom hereDisconnect the optical drive thermal sensor cable from the logic board by pulling its connector away from the socket on the logic board.
[* icon_note] Pull the connector parallel to the face of the logic board
.
[* black] Insert wisdom hereDisconnect the optical drive thermal sensor cable from the logic board by pulling its connector away from the socket on the logic board.
[* icon_note] Pull the connector parallel to the face of the logic board
.