Перейти к основному содержанию

Возврат к шагу #13

Редактировать с помощью panheadsnake -

Правка отклонена автор David Hodson

До
После
Без изменений

Шаг Линий

[* black] Remove the following sevennine screws securing the logic board to the rear case:
[* black] Remove the following sevennine screws securing the logic board to the rear case:
[* red] Three coarse-thread T10 Torx.
[* orange] Three fine-thread T10 Torx.
[* yellow] One long coarse-thread T10 Torx.
[* icon_caution] Two long corse thread T10 Torx on each side the memory compartment If not removed it will break the motherboard