Skip to main content

Изменения в этом шаге

Отредактированно Alan Wong -

Правка одобрена автор Alan Wong

Без изменений

Шаг Линий

[* black] Carefully place the screen and motherboard back into the calculator casing.
[* black] To slide the screen back in place, tilt the bottom side connected to the orange ribbon up. Gently push the top side of the screen down and into the casing. The connection port on the screen should fit snug into the opening at the top of the casing.
[* black] To fasten the motherboard to the casing, screw the 0.349 in. screws into the top two corners of the motherboard. Then screw the other four 0.165 in. into the middle sides and bottom corners of the motherboard.