Перейти к основному содержанию

Changes to Step #3

Edit by Sam Goldheart

Правка одобрена автор Sam Goldheart

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Apply a suction cup as close to the heated edge as possible.
[* black] Lift on the suction cup and insert the tip of an opening pick into the gap.
[* icon_caution] Do not insert the pick more than 1/16" (1.5 mm). Doing soOver-inserting the pick may damage the OLED panel.
[* icon_caution] Do not insert the pick more than 1/16" (1.5 mm). Doing soOver-inserting the pick may damage the OLED panel.