Перейти к основному содержанию

Изменения к шагу №6

Отредактированно Dominik Schnabelrauch -

Правка одобрена автор Dominik Schnabelrauch

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Slide the halberd spudgerspudger/opening pick to the upper corner of the phone to cut the adhesive and insert and opening pick to prevent the adhesive from sticking to the display.
[* black] Slide the halberd spudgerspudger/opening pick to the upper corner of the phone to cut the adhesive and insert and opening pick to prevent the adhesive from sticking to the display.
[* icon_note] Go slowly so that the tool doesn't slip out of the seam. If cutting becomes too difficult, [guide|25705|reheat|new_window=true] and reapply the iOpener.
[* black] Repeat the previous heating and cutting procedure for the remaining sides of the phone. Insert an opening pick on every corner and on both sides of the Note8.
[* icon_caution] Use a little extra caution when prying near the top edge so as not to damage the front-facing sensors and earpiece speaker.