Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #5

Редактировать с помощью 101 Tech USA -

Правка одобрена автор 101 Tech USA

До
После
Без изменений

Шаг Линий

[* black] Insert wisdom hereRemove the magazine catch screw, and the magazine catch assembly should come apart in four pieces (screw, button, spring, arm).
[* black] Punch out the small receiver pin from the right side (see picture). It is important that you do not try to do this from the other side, because one end of the pin is textured to prevent it from coming loose. Pushing this textured end through the receiver the wrong way may cause minor damage.
[* black] Set the selector to "semi" and remove the fire control assembly from the lower receiver
.
[* black] Insert wisdom hereRemove the magazine catch screw, and the magazine catch assembly should come apart in four pieces (screw, button, spring, arm).
[* black] Punch out the small receiver pin from the right side (see picture). It is important that you do not try to do this from the other side, because one end of the pin is textured to prevent it from coming loose. Pushing this textured end through the receiver the wrong way may cause minor damage.
[* black] Set the selector to "semi" and remove the fire control assembly from the lower receiver
.