Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #5

Редактировать с помощью Shelby Hemphill -

Правка одобрена автор Geoff Wacker

До
После
Без изменений

Шаг Линий

[* black] Remove the screw from the magazine catch screw, andcatch. After the screw is removed, the magazine catch assembly should come apart in four pieces (screw, button, spring, arm).
[* black] Punch out the small receiver pin from the right side of the gun (see picture). It is important that you do not try to do this from the other side, because oneright side. One end of the pin is textured to prevent it from coming loose. Pushingloose, and pushing this textured end through the receiver the wrong way may cause minor damage.
[* black] Remove the screw from the magazine catch screw, andcatch. After the screw is removed, the magazine catch assembly should come apart in four pieces (screw, button, spring, arm).
[* black] Punch out the small receiver pin from the right side of the gun (see picture). It is important that you do not try to do this from the other side, because oneright side. One end of the pin is textured to prevent it from coming loose. Pushingloose, and pushing this textured end through the receiver the wrong way may cause minor damage.
[* black] Set the selector to "semi" and remove the fire control assembly from the lower receiver.