Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #1

Редактировать с помощью scrodchunk -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* icon_note] The glass front panel on the second generation Touch has a plastic frame like a gasket around it, glued both to itsthe outer edge and also underof the wide black strips atglass. Inner metal clips grab onto the topplastic as pictured here. It is very important as you gradually release the clips, that you want to put work your tool between the metallic outer frame and this inner plastic frame - NOT between the glass and bottom of the deviceplastic frame/gasket piece.
[* icon_note] The glass front panel on the second generation Touch has a plastic frame like a gasket around it, glued both to itsthe outer edge and also underof the wide black strips atglass. Inner metal clips grab onto the topplastic as pictured here. It is very important as you gradually release the clips, that you want to put work your tool between the metallic outer frame and this inner plastic frame - NOT between the glass and bottom of the deviceplastic frame/gasket piece.
[* black] The picture at left (front panel already removed) shows the locations of the metal clips (shown in red) that snap on to the plastic frame. In the next few steps, try to pry the front panel up from the gaps between these clips.
[* icon_caution] Also, be mindful of the very thin and delicate touch screen ribbon cable (connector location shown in orange) attaching the front panel to the upper left corner of the Touch.