Возврат к шагу #2
Отредактированно Jeff Suovanen -
Правка одобрена автор Jeff Suovanen
- До
- После
- Без изменений
Шаг Линий
| + | [* icon_note] The next two steps demonstrate the iSclack, a handy tool that we recommend for anyone doing frequent repairs. ***If you aren't using the iSclack, skip down two steps for an alternate method.*** |
|---|---|
| + | [* black] If the plastic depth gauge is attached at the center of the iSclack, remove it now—it's not needed for larger iPhones like the XS Max. |
| + | [* black] Position the suction cups near the bottom edge of the iPhone—one on the front, and one on the back. |
| + | [* black] Press both suction cups firmly into place. |
| + | [* icon_note] If your display or back glass is badly cracked, covering it with a layer of clear packing tape may help the suction cups adhere. The iSclack also includes two pieces of tape for this purpose. |
Изображение 1
Нет предыдущего изображения
Добавлено
Изображение 2
Нет предыдущего изображения
Добавлено