Возврат к шагу #4
Отредактированно Alex Diaz-Kokaisl -
Правка одобрена автор Alex Diaz-Kokaisl
- До
- После
- Без изменений
Шаг Линий
| + | [* black] [guide|25705|Heat an iOpener|new_window=true] and thread it through the arms of the Anti-Clamp. |
|---|---|
| + | [* black] Fold the iOpener so it lays on the bottom edge of the iPhone. |
| + | [* black] Wait one minute to give the adhesive a chance to release and present an opening gap. |
| + | [* icon_note] Alternatively, you can use a [guide|157348|hair dryer|new_window=true] or a [guide|151116|heat gun|new_window=true] to soften the adhesive. |
| + | [* black] Insert an opening pick under the screen when the Anti-Clamp creates a large enough gap. |
| + | [* icon_note] If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn. |
| + | [* icon_caution] Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you. |
| + | [* black] ***Skip the next three steps.*** |
Изображение 1
Нет предыдущего изображения
Добавлено
Изображение 2
Нет предыдущего изображения
Добавлено