Перейти к основному содержанию

Changes to Step #1

Edit by Austin Culberson

Правка одобрена автор Austin Culberson

Удален
Добавлено
Без изменений

Шаг Линий

[* red] Using your fingers or a probe, loosen the four small tabs located on the side of the faceplate sub-assembly by gently bending up the metal cover. (Two are shown in the picture while the other two are on the other side of the screen.)
[* orange] Using the spudge, loosen the metal cover by prying it away from the six small plastic tabs.
[*
black] Insert wisdom hereRemove the metal cover.
[* red] Using your fingers or a probe, loosen the four small tabs located on the side of the faceplate sub-assembly by gently bending up the metal cover. (Two are shown in the picture while the other two are on the other side of the screen.)
[* orange] Using the spudge, loosen the metal cover by prying it away from the six small plastic tabs.
[*
black] Insert wisdom hereRemove the metal cover.

Image 1

Старая версия

Новая версия

Image 2

Старая версия

Новая версия

Image 3

Старая версия

Новая версия