Перейти к основному содержанию

Changes to Step #1

Edit by Austin Culberson

Правка одобрена автор Austin Culberson

Удален
Добавлено
Без изменений

Шаг Линий

[* red] Using your fingers or a probe, loosen the four small tabs located on the side of the faceplate sub-assembly by gently bending up the metal cover. (Two are shown in the picture while the other two are on the other side of the screen.)
[* orange] Using the spudgespudger, loosen the metal cover by prying it away from the six small plastic tabs. This can be done by gently working the spudger underneath the cover and pressing up on the cover around the tabs.
[* orange] Using the spudgespudger, loosen the metal cover by prying it away from the six small plastic tabs. This can be done by gently working the spudger underneath the cover and pressing up on the cover around the tabs.
[* black] Remove the metal cover.