Перейти к основному содержанию

Изменения к шагу №2

Отредактированно Billy Pho -

Правка одобрена автор Billy Pho

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Use a spudger to flip up the small flap on the ZIF connector.
[* black] Gently pull the ribbon cable out of the ZIF connector.
[* black] Lift the AMP Board gently while sliding the ribbon cable out through the center hole to reveal another set of wireswires underneath the board.
[* black] Lift the AMP Board gently while sliding the ribbon cable out through the center hole to reveal another set of wireswires underneath the board.