Возврат к шагу #1
Редактировать с помощью Andrew Krasts -
Правка одобрена автор Andrew Krasts
- До
- После
- Без изменений
Шаг Линий
| [* black] Loosen the 4 (2 on each side) 4x22mm hex screws on the front of axle casing. |
| [* icon_note] Do not remove the screws all of the way. Take the screws approximately 3/4 of the way out to allow the axel to slide freely when it is removed. |
| [* icon_note] Do not remove the screws all of the way. Take the screws approximately 3/4 of the way out to allow the axel to slide freely when it is removed. |