Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью Theodore Newman -

Правка одобрена автор Theodore Newman

До
После
Без изменений

Шаг Линий

[* black] Loosen the 4 (2 on each side) 4x22mm22mm hex screws on the front of axle casing.
[* black] Loosen the 4 (2 on each side) 4x22mm22mm hex screws on the front of axle casing.
[* icon_note] Do not remove the screws all of the way. Take the screws approximately 3/4 of the way out to allow the axel to slide freely when it is removed.