Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью Sterling Grande -

Правка одобрена автор Sterling Grande

До
После
Без изменений

Шаг Линий

[* black] Loosen the 4 (2 on each side) 22mm hex screws on the front of the axle casing.
[* icon_note] Do not remove the screws all of the way. Take the screws approximately 3/4 of the way out to allow the axelaxle to slide freely when it is removed.
[* black] Loosen the 4 (2 on each side) 22mm hex screws on the front of the axle casing.
[* icon_note] Do not remove the screws all of the way. Take the screws approximately 3/4 of the way out to allow the axelaxle to slide freely when it is removed.