Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью Liz Matresse -

Правка одобрена автор Liz Matresse

До
После
Без изменений

Шаг Линий

[* black] Loosen the 4 (2 on each side)title] Hex Screws
[* red] Using the 4mm Allen wrench, partially unscrew the four
22mm hex screws on the front of the axle casing.
[* icon_note] Do not remove the screws all of the way. Take the screws approximately 3/4 of the way out
casing to allow the axle to slide freely when it is removedfreely.
[* black] Loosen the 4 (2 on each side)title] Hex Screws
[* red] Using the 4mm Allen wrench, partially unscrew the four
22mm hex screws on the front of the axle casing.
[* icon_note] Do not remove the screws all of the way. Take the screws approximately 3/4 of the way out
casing to allow the axle to slide freely when it is removedfreely.