Перейти к основному содержанию

Изменения к шагу №1

Отредактированно Wesley Shank -

Правка одобрена автор Adam O'Camb

Без изменений

Шаг Линий

[* black] Use a heat gun/hair dryer to warm the outer 1/2 inch of the screen. It should be very warm but not too hot to touch or you may cause heat damage to components inside the device.
[* black] Use the iFixit Opening Tool to get between the plastic screen and the device to pry off the screen.
[* icon_note] The metal spudger may be needed to get between the screen.
[* icon_caution] The metal spudger may cause more damage to the screen if used with force.