Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Jonathan Nunez -

Правка одобрена автор Jonathan Nunez

До
После
Без изменений

Шаг Линий

[title] Cleaning the CPU and cooler
[* black] Put a little bit of isopropyl alcohol on the microfiber.
[* black] Clean all of the thermal paste residue from the cpu. Make sure the the cpu is dry after the cleaning is done.
[* black] The new cooler usually comes with its own thermal paste, but if it doesn't or you want to add better thermal paste, clean the cooler the same way as the cpu. Make sure it is dry afterwords too.
-[* black] Add a even coating of thermal paste at the center of the cooler and only as big as the cpu.
+[* black] Add a small amount of thermal paste at the center of the cooler.