Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Jonathan Nunez -

Правка одобрена автор Jonathan Nunez

До
После
Без изменений

Шаг Линий

[title] Cleaning the CPU and cooler
[* black] Put a little bit of isopropyl alcohol on the microfiber.
-[* black] Clean all of the thermal paste residue from the cpu. Make sure the the cpu is dry after the cleaning is done.
-[* black] The new cooler usually comes with its own thermal paste, but if it doesn't or you want to add better thermal paste, clean the cooler the same way as the cpu. Make sure it is dry afterwards too.
-[* black] Add a small amount of thermal paste at the center of the cooler.
+[* black] Clean all of the thermal paste residue from the CPU.
+[* icon_note] The new cooler usually comes with its own thermal paste, but if it doesn't or you want to add better thermal paste, clean the cooler the same way as the CPU.
+[* icon_note] Add a small amount of thermal paste at the center of the cooler.
+[* icon_caution] Make sure that the surface of the CPU and cooler is dry before applying the thermal paste.