Перейти к основному содержанию

Возврат к шагу #5

Редактировать с помощью Jonathan Nunez -

Правка одобрена автор Jonathan Nunez

Без изменений

Шаг Линий

-[* black] If new cooler does not have thermal paste, add it on the cooler
-[* black] Plug the cooler at the same location of the one being replaced.
+[title] Placing new cooler
+[* black] Place the new cooler over the cpu and align it with the four corners where the previous cooler was attached to.
+[* black] Screw in the cpu, start at a corner and then move on the corner diagonal from it, making an "X" shape as you screw them in.
+[* black] Dose not have to be tight, just as long as the cooler does not move, and both cooler and cpu are touching.
+[* black] Plug in the power of the cooler in the same location of the previous cooler.