Перейти к основному содержанию

Changes to Step #4

Edit by Ron Davis

Правка одобрена автор Ron Davis

Удален
Добавлено
Без изменений

Шаг Линий

[* icon_caution] When disconnecting any wire connection do notblack] Holding them by their white plastic coverings, firmly pull by wiresthe two wires from the power switch.
[* icon_caution] Be sure to grip the wires from their attached connectors
. Pulling directly on the wires could damage your vacuum.
[* black] Remove the power terminals from the switch by strongly pulling them away from the switch while gripping the white, plastic covering.

[* icon_reminder] The terminals will only fit one way when reassembling, i.e., onlyduring reassembly. Only one of the terminal wires is long enough to reach the far terminal of the switch.
[* icon_caution] When disconnecting any wire connection do notblack] Holding them by their white plastic coverings, firmly pull by wiresthe two wires from the power switch.
[* icon_caution] Be sure to grip the wires from their attached connectors
. Pulling directly on the wires could damage your vacuum.
[* black] Remove the power terminals from the switch by strongly pulling them away from the switch while gripping the white, plastic covering.

[* icon_reminder] The terminals will only fit one way when reassembling, i.e., onlyduring reassembly. Only one of the terminal wires is long enough to reach the far terminal of the switch.