Перейти к основному содержанию

Изменения к шагу №1

Отредактированно Eric Gaulke -

Правка одобрена автор Eric Gaulke

Удален
Добавлено
Без изменений

Шаг Линий

[* blackred] Remove all 2.5mmthe Phillips 10.0mm and 7.0mm screws holdingon the circuit board tooutside of the case.
[* blackred] Remove all 2.5mmthe Phillips 10.0mm and 7.0mm screws holdingon the circuit board tooutside of the case.
[* icon_caution] Make sure the device has been powered off and disconnected from the power source for at least a day before touching the electronic components.