Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #6

Редактировать с помощью Donald Percivalle -

Правка одобрена автор Donald Percivalle

До
После
Без изменений

Шаг Линий

[* red] Remove the three T15 torquetorx screws that scure the cover to the brush clutch belt.
[* red] Remove the three T15 torquetorx screws that scure the cover to the brush clutch belt.
[* black] Remove the cover of the brush clutch belt by pulling the cover outward, directly towards your body as you face the vacuum.
[* black] Remove the belt from the brush clutch axel by pushing it towards the gap to its left.
[* icon_reminder] When reassembling your vacuum, pull the belt with your finger towards the axel. Using a screw-driverscrewdriver, or similar device, will impede access to the axel and prove overly-difficult and frustrating.
[* icon_reminder] When reassembling your vacuum, pull the belt with your finger towards the axel. Using a screw-driverscrewdriver, or similar device, will impede access to the axel and prove overly-difficult and frustrating.

Изображение 1

Старая версия

Новая версия

Изображение 2

Старая версия

Новая версия

Изображение 3

Старая версия

Новая версия