Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #6

Редактировать с помощью Andrea -

Правка одобрена автор Andrea

До
После
Без изменений

Шаг Линий

[* red] Remove the three T15 torx screws that secure the cover to the brush clutch belt.
[* green] Assuming you are facing the vacuum, pull the cover of the brush clutch belt out towards you.
[* black] Remove the belt from the brush clutch axle by pulling it to your right.
[* icon_reminder] To reassemble your vacuum, pull the belt with your finger towards the axle. (Using a screwdriver, or a similar device, will delay the access to the axle.)
[* icon_reminder] To reassemble your vacuum, pull the belt with your finger towards the axle. (Using a screwdriver, or a similar device, will delay the access to the axle.)