Возврат к шагу #3
Отредактированно Kristen Gismondi -
Правка одобрена автор Kristen Gismondi
- До
- После
- Без изменений
Шаг Линий
| - | [* red] Remove the 6 mm screws around the edges with the |
|---|---|
| + | [* red] Remove the 6 mm screws around the edges with the Phillips head screw driver. Then remove the 6mm screw holding the disc drive into place. |
| [* orange] Sliding out the disc drive will reveal the final two 4 mm screws on the bottom of the device. |