Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью John Miller -

Правка одобрена автор John Miller

До
После
Без изменений

Шаг Линий

[* black] Hold the front of the phone with the face down.
[* red] Using a T6 screwdriver bit, loosen the 8 screws holding the keypad protector in place.
[* [* black] UsingThe four screws in the pry tool, prymiddle loosen the keypad protector from the phoneconnector, while pulling onthe outer screws completely remove the keypad protector.
[* black] Loosen the keypad connector by lifting
it up with your other handone finger.
[* [* black] UsingThe four screws in the pry tool, prymiddle loosen the keypad protector from the phoneconnector, while pulling onthe outer screws completely remove the keypad protector.
[* black] Loosen the keypad connector by lifting
it up with your other handone finger.

Изображение 3

Старая версия

Новая версия