Skip to main content

Changes to Step #7

Edit by Gallomimia

Правка отклонена by Miroslav Djuric

Deleted
Added
Unchanged

Step Lines

[* black] Use a pair of tweezers to slide the click wheel ribbon cable out of its socket.
[* icon_caution] Before proceeding, be sure that '''both''' the '''click wheel ribbon cable socket''' ''and'' '''its cable''' are freed from the adhesive securing them to the dock connector and logic board.
[* black] Peel backDo not pull the cable on both ends!logic board out yet.
[* black] Peel backDo not pull the cable on both ends!logic board out yet.