Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

[* icon_caution] Before you proceed, make sure your computer is turned off and is not connected to any power source.
[*
red] Remove the 7mmsingle 7 mm Phillips #1 screwscrew securing the optical drive.
[* icon_caution] Before you proceed, make sure your computer is turned off and is not connected to any power source.
[*
red] Remove the 7mmsingle 7 mm Phillips #1 screwscrew securing the optical drive.
[* icon_note] Be sure to store the screws carefully as they are easy to lose. A magnetic project mat is recommended

Изображение 2

Удален